As functionality and performance increase in the electronics field, there is an increasing need for finer and more precise coatings.
The HD series dispensing machine is a micro-volume, high-speed, high-precision machine that meets the core requirements of artificial intelligence, Internet of Things, CASE, blockchain and other 5G technologies that change life and social fields.
1. Quickly customize a dedicated platform according to customer needs;
2. By measuring any three points on the PCB, the plane height is calculated, and the needle height is automatically compensated based on the measured height data;
3. Efficient image processing speed reduces visual retrieval and visual inspection time;
4. Non-contact laser can detect 1μm warpage of the substrate;
5. High-speed micro-spraying of high-viscosity materials, automatic correction and compensation of chip cutting and welding errors;
6. Solder paste printing, small amount of high-speed dot spraying, small dot spacing.
Application of Solder Paste And Adhesive Dispenser
Features of Solder Paste And Adhesive Dispenser
Transmission Structure System:
1.The machine adopts X Y linear motor drive control, the reciprocating position accuracy is 3σ±5um (X, Y, Z axis ), and the dynamic position accuracy is 3σ±3um (X, Y axis);
2. Load-type gantry structure ensures the stability and accuracy of the machine during high-speed movement.
Function configuration:
1.Customize the exclusive platform to better suit the actual needs of customers;
2. Automatic correction of substrate warp height;
3. Penetration monitoring function, with upper and lower dual cameras, can monitor the material penetration under the flipchip in real time throughout the process, and automatically feedback to adjust the next filling
| I.C.T-HD330 | Solder Paste And Adhesive Dispenser | ||
| Max PCB Size | 50*70~250*330mm | |
| Drive | Linear motor | |
| X / Y repeatability precision- 3 sigma | ±5μm | |
| X / Y max speed | 1500mm/sec | |
| Acceleration | 1.5G | |
| Picture processing-digital camera -automaton | Repeatability | ±1μm |
| Precision | MAX: 0.03sec/point | |
| Alignment | S | |
| Chip master | S | |
| Bad mark | S | |
| Repeatability precision | S | |
| Non-Stop CCD | S | |
| Height measure system(Laser Type) | Repeatability precision | ±1μm |
| 0.1sec/point | ||
| Calibration | Robot-camera | S |
| Camera-z | S | |
| Camera-needle | S | |
| Needle-z | S | |
| Simply monitor | Dispensing area (OK/NG) | S |
| Dispensing perimeter (OK/NG) | S | |
| Underfill permeation auto-monitor | S | |
| Bad mark inspection | S | |
| Height inspection | S | |
| AOI feedback | Dispensing volume feedback | S |
| Picture processing feedback | S | |
| Height measure feedback | S | |
| Needle cleaning | Air blow type | S |
| Vacuum type | S | |
| Material discharge | S | |
| Electronic scales | Accuracy | 0.1mg / 0.01mg |
| Feedback | OPTION | |
| Heat unit(pre/main/after) | OPTION | |
| Compressed air | 0.4-0.6 Mpa | |
| Power | AC200V,3φ,20A | |
| Dimension | 1300*1100*1380mm | |
| Weight | 850kg | |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
About I.C.T:
I.C.T is a leading provider of factory planning solution. We have 3 wholly-owned factories, providing professional consultation and services for global customers. We have more than 22 years of eletronic overall solutions. We not only provide a complete set of equipment, but also provide full range of technical support and services, and give customers more reasonable professional advice. We help many customersv to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are trustworthy.
Exhibition
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT