* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
I.C.T-5200 Fixture Cleaning Machine is used to clean grease, flux, dusts on the surface of all kinds of SMT fixtures，tray, reflow oven cooler and filter, wave-soldering oven claw, chains, and nets…etc.
I.C.T-5200 is made up of wash unit, rinse unit, dry unit, rotation cleaning basket unit and control unit. Put the dirt SMT fixtures on to the cleaning basket, setting the cleaning parameters, the machine will automatically complete wash, rinse and dry process by just pushing start key. The fixtures after cleaning is very clean and dry, ready to use at any time.
10.The fixtures are clean and dry after cleaning, standby and ready for use at any time.
Material:
Control Box
Mitsubishi,Schneider,CKD,Omron
Cleaning Basket
Auto(Cleaning,Rinsing,Drying)
Pump
High pressure,high flow,electrice
Effect:
Before Cleaning
After Cleaning
Before Cleaning
After Cleaning
| Item | I.C.T-5200 |
| Cleaning basket size | Φ1000mm x H 200mm. Special size option |
| Spray unit | Φ1000mm x H 200mm. Special size option |
| Spray unit | Upper/lower/front side,720°all-around spray |
| 3-level filter system | 1mm /50um/20um filters |
| Compressed air pressure | 0.5~0.7Mpa |
| Clean tank capacity | 80L |
| Rinse water heat temp | Room temp~80℃ |
| Hot air heat temp | Room temp~90℃ |
| Clean pump power | 2.2KW |
| Clean detergent power | 9KW |
| Air blower power | 4.0KW |
| Power supply | 3 P,AC 380V,50/60HZ,33KW |
| Machine size | L1380 x W2100 x H 1400 (mm) |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
FAQ
I.C.T - Our Company
About I.C.T:
I.C.T is a leading provider of factory planning solution. We have 3 wholly-owned factories, providing professional consultation and services for global customers. We have more than 22 years of eletronic overall solutions. We not only provide a complete set of equipment, but also provide full range of technical support and services, and give customers more reasonable professional advice. We help many customersv to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are trustworthy.
Exhibition
For SMT Factory Setup, We Can Do for You:
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT