IC Chip Programming
The Programming System is a highly efficient, fully automated, intelligent IC programming machine designed for the production of large quantities of electronic products. each module is completely independent, programming speed is fast and efficiency is much higher than parallel mass production programmers. The system design modules are optimised for short project switching times and high reliability..
1. Various input and output modules can be expanded. Module types are: Tray to Tray,Tray to Reel,Reel to Tray,Reel to Reel;
2. Equipped with a high-definition industrial CCD to automatically identify the component direction and compensate for the component direction to a certain extent;
3. The material taking and discharging mechanism has self-positioning function, which is used to locate the programmer socket and the material taking and discharging position;
4. It has various protection or fool proof functions, each expansion module has empty material detection;
5. The tray is fed automatically, and the tray is programmed. If there are defective products and the tray is not full, the tray will be replenished automatically;
6. The option can be connected to the MES system, or the lightweight CPS system can be selected to output the report results;
7. Multiple detection protection, air source pressure, vacuum pressure, component floating height, component stacking, missing parts, etc;
8. Special programming adapter, you need to provide samples and product specifications to customize the exclusive adapter;
9. Modular design, quick replacement of adapters can quickly replace products and improve efficiency.
10. Equipped with dual ion blowers to eliminate static electricity, avoid NG materials caused by static electricity, and reduce the defective rate of production.
1. High-precision Panasonic servo motor, repeatable positioning accuracy reaches ±0.015mm;
2. Double linear slide rails + high-precision screw rods cooperate with each other to ensure the stability of the overall machine;
3. Each axis has a limit sensor, and the software sets the limit position to ensure maximum machine safety.
1. It has 2 feeder stations, both of which can place 8-24mm tape feeders;
2. Patented automatic tray feeding supports 15 trays of materials at the same time;
3. Divided into 4 areas, programming picking area, programming waiting area, programming completion area, marking area, and programming waiting area. More pallets can be added at any time without stopping the machine for loading;
4. The movable component locks the pallet to ensure that the pallet in the marked area will not be cheap.
1. Double heaters and double pressing wheels accurately control the temperature to ensure that the packaging film can adhere closely to the tape to avoid component loss;
2. Comes with a built-in sensor that can detect components before packaging to avoid abnormalities such as misalignment and stacking of components;
3. The stepper electrical appliance controls the reel rotation speed, closely matching the machine programming speed;
4. The mark device can mark components before packaging to reduce errors;
5. With embossed knurled knob, the guide groove can be adjusted to fit the width of the reel;
6. The material packaging method can also be changed according to actual needs, pallet to reel, tube to reel, reel to pallet, tube to pallet.
1. It has 8 work areas, supports large-volume programming, and greatly improves programming production efficiency;
2. Modular design, no cumbersome steps are required to switch products, just replace the programming adapter; 3. Exclusive one-to-one customized programming adapter, supporting multiple IC types, including EEPROM, NAND/NOR FLASH, MCU, etc;
4. To fix the NG recycling box, you can place a tray next to it as an NG tray or as a refill tray. After NG, replenish a component from this tray and reprogram it to ensure that the OK tray is full;
5. Can be compatible with customers' own programming adapters according to usage requirements.
| Item | Model | I.C.T-910 IC Chip Programming |
| Transmission system | Efficiency of the machine | Standard machine: Equipped with universal burner of Puro and other brands: 8 sets of 32-64sit burners: UPH 2000-3000PCS/H; Equipped with 204AP brand universal burner: 3 sets of 12sit burners: UPH1600-2200PCS/H |
| A small number of diverse modes: equipped with 3 sets of 204A burners, UPH 1600-1800PCS/H. | ||
| Packaging conversion mode: pallet to tape production capacity of 4000PCS/H (12mm tape products as an example) | ||
| Control precision | Precision servo screw drive, accuracy: X-axis ±0.015mm; Y-axis ±0.015mm; Z-axis ±0.03mm; P-axis ±0.03mm; U(θ)-axis ±0.15° | |
| Suitable package form | PLCC, JLCC , SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, BGA, CSP, SCSP, and so on. (Open Top adapters, some ICs need to be customized with special adapter consumables). | |
| Includes precision upper and bottom CCD positioning system. | ||
| Feeding and unloading device | Tray IN/ OUT | Supports automatic Tray feeding, can send 10 trays of JEDEC Tray products at the same time, and supports marking tray components after programming |
| Tube IN/ OUT | Support 4-tube IC electromagnetic vibration feeding | |
| Tape IN/ OUT | Electric feeder, supports 8-24mm self adhesive film or hot press packaging. | |
| Conversion of packaging methods | Different packages are converted to each other, Tray packed to Tape packed, Tape packed to Tray packed. | |
| Other | Nozzle | 4pcs |
| Camera | 2pcs (Component camera + Marking camera) | |
| Feeder station | 2pcs (8-24mm) | |
| Ion fan | 2pcs | |
| Power | Operating voltage: 190~240V/50Hz, 2.0KW | |
| Dimension | L1450*W860*H1450mm | |
| Weight | 700kg | |
* I.C.T keeps working on quality and performance,specifications and appearance may be updated without particular notice.
I.C.T - Our Company
About I.C.T:
I.C.T is a leading provider of factory planning solution. We have 3 wholly-owned factories, providing professional consultation and services for global customers. We have more than 22 years of eletronic overall solutions. We not only provide a complete set of equipment, but also provide full range of technical support and services, and give customers more reasonable professional advice. We help many customersv to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are to set up factories in LED, TV, mobile phone, DVB, EMS and other indutries all over the world. We are trustworthy.
Exhibition
For SMT Factory Setup, We Can Do for You:
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT