Publish Time: 2021-07-26 Origin: www.smtfactory.com
Take Samsung SMT placement machine as an example, PCB chip injection machine, SAMSUNG Pick & Place Machine, multi-function placement machine, high-speed LED SMT placement machine manufacturer, suitable for SMT smart factories, SAMSUNG Pick & Place Machine adopts surface mount technology is currently the most popular technology and process in the electronics assembly industry.
SAMSUNG Pick & Place Machine can be equipped with a variety of placement components.
SAMSUNG Pick & Place Machine has reprogramming and feeder replacement functions.
SAMSUNG Pick & Place Machine can automatically adjust processes under program control
SAMSUNG Pick & Place Machine has a wide range of placement components, which is more adaptable than placement machines that can only mount SMC or a small amount of SMD. In addition, the main factors affecting the types of components placed by the placement machine are placement accuracy, placement tools, compatibility of centering mechanisms and components, and the number and types of feeders that SAMSUNG Pick & Place Machine can accommodate.
However, some SAMSUNG Pick & Place Machines can only accommodate a limited number of feeders, while some placement machines can accommodate most or all types of feeders, and the number of feeders that can be accommodated is also relatively large. Obviously, the latter It is more adaptable than the former. The capacity of the feeder on the SAMSUNG Pick & Place Machine is usually expressed by the maximum number of 8mm tape feeders that can be installed on the placement machine.
First of all, when SAMSUNG Pick & Place Machine converts from assembling one type of PCB to assembling another type of PCB, reprogramming of SAMSUNG Pick & Place Machine, feeder replacement, PCB transfer mechanism and positioning table are required The adjustment work of the adjustment, the adjustment/replacement of the SMT head, etc.
When programming the SAMSUNG Pick & Place Machine, the placement machine often uses two programming methods, manual teaching programming and computer programming. Low-end placement machines often use manual teaching programming, and higher-end placement machines use computer programming. To replace the feeder, in order to reduce the time it takes to replace the feeder, the most common method is to use a "quick release" feeder. The faster method is to replace the feeder rack so that each PCB type The component feeders are all mounted on a separate feeder rack for easy replacement.
Regarding the adjustment of the PCB transfer mechanism and positioning table, when the size of the replaced PCB is different from the size of the currently mounted PCB, the width of the PCB positioning table of SAMSUNG Pick & Place Machine and the transfer mechanism of the PCB should be adjusted. The automatic placement machine can be adjusted automatically under program control, and the lower-grade SAMSUNG Pick & Place Machine can be adjusted manually.
Finally, regarding the adjustment and replacement of the SAMSUNG Pick & Place Machine, when the type of components to be mounted on the PCB exceeds the placement range of a placement head, or when the PCB type is changed, the placement head is often replaced or adjusted. Most SAMSUNG Pick & Place Machines can automatically perform replacement or adjustment procedures under program control, while low-end placement machines use manual replacement and adjustment operations.