The busy 2021 is coming to an end. Before we prepare to welcome the new year, the I.C.T team would like to take this opportunity to thank new and old customers for their trust and support to our team. We are also very pleased to see that I.C.T equipment can play an effective role in customers' factories, and customers are becoming more and more successful in their respective fields. We will continue to stick to our original intention and provide prefect machines and services.
Selective wave soldering is soldering equipment for special PCBA. Its characteristics are good soldering effect, low soldering output, and it can complete PCBA with harsh conditions. These wave soldering, soldering machines can't do it.
For example, PCBA with a display screen, the display screen cannot be heated; Or the components are relatively high, and there are a lot of SMD interference beside the position to be soldered, and so on.
Selective wave soldering machine includes spraying flux area, preheating area, soldering area, and some modules can be added according to demand. If you want to increase the soldering speed, it is also possible to add 1 or 2 soldering zone.
There are four models of selective wave soldering machine for you to choose from, and we can select the appropriate model for you according to your specific needs.
The most troublesome thing for SMT production line managers should be the suspension of production on the production line. The reason may be that solder paste needs to be added, the materials of pick and place machine need to be replaced, and so on.
According to statistics, each factory has a high probability of making mistakes in manual splicing. On average, there will be half an hour to 1-hour downtime every day due to splicing. Calculating the cost loss in one year will be huge. And materials below 8mm are the easiest to connect incorrectly, and capacitors and resistors are also the easiest to confuse.
I.C.T-AISM08:
I.C.T automatic splicing machine can solve this problem, with a pass rate of more than 98%, and the splicing can be completed in 8 seconds.
The CCD system can identify materials as small as 01005.
It can be connected to the MES production system to facilitate the traceabillity of the factory.
The optional RC measurement function makes it easy to distinguish capacitance and resistance.
Each person can learn to operate this machine in 5 minutes, which reduces the company's worries about training new employees and reliance on older employees.
English
