Products

I.C.T provides a wide range of SMT machines for SMT production line, DIP assembly line and PCBA coating line.

I.C.T Global Support

Product Category

SMT Oven SMT PCB Loader SMT PCB Conveyor Pcb Loader Machine Hot Air Reflow Oven SMT Machine PCB Conveyors SMT Conveyor PCB Linking Conveyor PCB Reflow Oven PCB handling equipment

RX-8 | High Speed SMT Mounter JUKI Surface Mount Technology System

Share to:

RX-8 | High Speed SMT Mounter JUKI Surface Mount Technology System

Name: RX-8 | High Speed SMT Mounter JUKI Surface Mount Technology System
Brand: JUKI
Rating: 5.0 (91 reviews)

RX-8 | High Speed SMT Mounter JUKI Surface Mount Technology System
High-Speed Compact Modular Mounter RX-8
Highest placement rates per square meter (sq foot)
Achieves high-speed placements of up to 100,000 CPH

Model:
RX-8
Brand:
JUKI

Availability:

Quantity:



Inquire Add to Basket

RX-8 | High Speed SMT Mounter JUKI Surface Mount Technology System

Introduction

JUKI High Speed SMT Mounter RX-8

Highest placement rates per square meter (sq foot)

Achieves high-speed placements of up to 100,000 CPH

Features:

High-speed placements of up to 100,000 CPH.*¹
Best-in-class placement rate per square meter(sq ft).*²
Integrates seamlessly with the production enviroment
Trace Monitor tracks quality throughout production process
Low impact placement for flexible circuits
The P20 high-precision planet head is ideal for high speed pocking and placing from a single reel.
State-of-the-art centering and inspection vision system
New high accuracy camera for inspection and centering

Specification

Model	JUKI High Speed SMT Mounter RX-8
Board size	50×50～510mm¹ ²×450mm
Component height	3mm
Component size	0201*³～5mm
Placement speed (Optimum）	100,000CPH
Placement Accuracy	±0.04mm (Cpk ≧1)
Feeder capacity	Upto 56 *⁴
Power supply	3-phase AC200V, 220V 430V *⁵
Apparent power	2.1kVA
Operating air pressure	0.5±0.05MPa
Air consumption (standard)	20L/ min ANR (during normal operation)
Machine dimensions (W x D x H)*⁶	998mm×1,895mm×1,530mm
Mass (approximately)	1,810 kg (with fixed bank)/ 1,760 kg (with bank changing)

*1 BOC, Bad Mark, and 2D barcode can be read only if board length is from 50mm to 350mm.
*2 In long board mode (two boards can be produced simultaneously up to 420mm long).
*3 Please contact I.C.T for details.
*4 When using RF08AS.
*5 220V – 430V requires a separate transformer.
*6 Depth D does not include the monitor, and height H does not include the signal light when the conveyor height is 900 mm.