English  |
Solder Tin Separator
I.C.T
| Quantity: | |
|---|---|
1. Touch screen control.
2. PID control heating temperature.
3. Using high temperature heater, the operation is very economical.
4. The feeding part is installed outside for easy operation.
5. The separated pure tin is very reliable and can be directly put into production after cooling.
6. The separated dust directly enters the collection box.
7. Equipped with exhaust fan filter, which uses stainless mesh + activated carbon foam, can effectively filter toluene and xylene in smoke.
8. Low temperature separation: the machine only need to heat up to 280 degrees can be separated. Pure physical way: do not need to add any chemical non-chemical substances; the good solder in the tin residue and the real oxide, the solder without any pollution or quality or quantity changes.
9. Wet separation method: Solder by soldering solder oxide, no secondary oxidation, static separation, effectively reduce dust pollution.
10. Economic design, small size, easy to move, manually put tin, with tin car.
11. Off-line independent operation, tin slag can be centralized treatment, high separation rate, multi-wave soldering can share on separator
Specification: | |
| Dimension:(mm) | 680*850*1050 |
| Weight(kg) | Approx.140kg |
| Power Supply | AC 220-240V 50Hz |
| Power (kw) | 5kw |
| Heating time | 50min |
| Control Mode | PID + SSR |
| Solder Temperature | 350℃ |
| Solder Pot Capacity | 70kg |
| Control System | Touch screen |
| Solder bar | 1.3kg/pcs |
| Operation | Manual feed, Automatic separation |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
1. Touch screen control.
2. PID control heating temperature.
3. Using high temperature heater, the operation is very economical.
4. The feeding part is installed outside for easy operation.
5. The separated pure tin is very reliable and can be directly put into production after cooling.
6. The separated dust directly enters the collection box.
7. Equipped with exhaust fan filter, which uses stainless mesh + activated carbon foam, can effectively filter toluene and xylene in smoke.
8. Low temperature separation: the machine only need to heat up to 280 degrees can be separated. Pure physical way: do not need to add any chemical non-chemical substances; the good solder in the tin residue and the real oxide, the solder without any pollution or quality or quantity changes.
9. Wet separation method: Solder by soldering solder oxide, no secondary oxidation, static separation, effectively reduce dust pollution.
10. Economic design, small size, easy to move, manually put tin, with tin car.
11. Off-line independent operation, tin slag can be centralized treatment, high separation rate, multi-wave soldering can share on separator
Specification: | |
| Dimension:(mm) | 680*850*1050 |
| Weight(kg) | Approx.140kg |
| Power Supply | AC 220-240V 50Hz |
| Power (kw) | 5kw |
| Heating time | 50min |
| Control Mode | PID + SSR |
| Solder Temperature | 350℃ |
| Solder Pot Capacity | 70kg |
| Control System | Touch screen |
| Solder bar | 1.3kg/pcs |
| Operation | Manual feed, Automatic separation |
* I.C.T keeps working on quality and performance, specifications and appearance may be updated without particular notice.
